速獲得稱量結果 – 價值永恒
無論是簡單的日常工作，還是復雜的稱量程序，NewClassic MS半微量天平將卓越的性能和提高生產力進行了完美的結合，這一切都來源于快速的穩定時間以及一貫的可靠結果。來自瑞士的高分辨率稱量技術(HRT)，保證了整個稱量范圍內的始終。創新左右手互換開關門(ErgoDoor)使樣品的稱量盡可能簡單和方便。內置日期和時間功能，進行符合GLP/GMP規范的打印輸出，確保您的研究的全面控制和可追溯性
 
特點和利益
稱量
采用梅特勒-托利多高分辨率稱量技術(HRT)，內置兩組砝碼。配合全自動校準技術(FACT)，確保天平自動完成校正和線性化。
高效處理
減少每次稱量過程必須的操作步驟。左右手互換開關門(ErgoDoor)，實現一只手打開防風罩的同時，另一手進行加樣。
節約空間
折疊式玻璃防風門，為您節約了使用空間，避免凸出天平以外。天平背部的通訊接口可從側面進行連接。
易于清潔
天平清潔從未如此方便：通過防風罩鎖定裝置QuickLock)拆卸防風罩，僅需幾個步驟，并且所有防風罩玻璃和承水盤均可放入洗碗機清洗。

HCD (High Contrast Display)
FACT fully automatic time and temperature-controlled internal adjustment
Protective cover (terminal) 
Protective cover
Below weighing hook for weighing below the balance
HRT weighing cell (HiRes Technology)
 
Overload Protection
Built in Date and Time function
 
SmartTrac shows the entire weighing range
Programmable 3 SmartKeys for shortcut access to applications
Protection of main balance configuration

Weighing in 16 different units
Taring over the entire weighing range
Be adapted to the environment
Applications like Piece counting, Percent weighing, Free factor, Statistics, Formulation, Totaling
Working in different languages: German, English, French, Spanish, Italian, Polish, Czech

規格 - MS105 半微量天平
Limit values  
 
Maximum capacity  120 g
Readability  0.01 mg
Repeatability (at nominal load) 1)  0.04 mg (100 g)
Repeatability (at low load) 1)  0.02 mg (20g)
Linearity deviation  0.1 mg
Sensitivity offset 2)  0.4 mg (100 g)
 
Typical values 
 
Repeatability (at nominal load) 1)  0.03 mg (100 g)
Repeatability (at low load) 1)  0.015 mg (20g)
Minimum weight (according to USP)  45 mg
Minimum weight (@U=1%, 2 sd)  3 mg
Settling time  8 s
Sensitivity offset 2)  0.3 mg (100 g)
 
Dimensions 
 
Weighing pan dimensions (mm)  ? 80
Balance dimensions LxWxH (mm)  358x247x331

1) Standard deviation (sd)
2) Stability of sensitivity with FACT self-adjustment switched on