人妻日韩欧美综合制服,亚洲精品少妇一区二区,国产精品天天干

企業檔案

浙江樂清巨祥防爆電器有限公司

免企業未認證證營業執照未上傳

經營模式：工廠

所在地：浙江省

進入商鋪在線咨詢

產品搜索

NFC9100防眩棚頂燈性能特點

　　1.通過先進的配光設計和特殊工藝處理，光線柔和均勻，無眩光，平均使用壽命在10000小時。

　　2.采用高強度鋁合金外殼和優化的結構設計，具有抗強力沖擊能力。優化的結構設計和高科技表面噴涂技術，結構緊湊、外形美觀，安裝方便可采用嵌入式和吸頂式等多種安裝方式。

3.透明件采用進口的FD膠材料，透光度高。燈體選用高強度合金材料經高科技表面處理，耐腐蝕、抗沖擊，不生銹；可在惡劣環境中長期使用。

　　獨立的腔體結構設計，散熱性能好，極大的提高了燈具的壽命；維護方便，簡單。

　　4.結構緊湊、外形美觀，安裝方便可采用嵌入式和吸頂式等多種安裝方式。

　　5.A、B兩種的配光設計，其中A型為對稱配光設計，B型為非對稱配光兩種型號，可根據不同的現場照明需求進行選擇。

NFC9100防眩棚頂燈技術參數

　　額定電壓：220VAC 50Hz

　　光源：(MH氣體放電,或HPS氣休放電)

　　額定功率：75W / 150W

　　防腐等級：WF2

　　防護等級：IP65

　　外形尺寸：300×300×205mm

　　光通量：6000LM 9500LM

NFC9100防眩棚頂燈注意事項

　　收貨時請仔細檢查在運輸過程中是否有產品損壞現象，如外殼劃傷、裂痕、玻璃和燈泡破碎等；產品開箱后請檢查包裝箱內的附件是否齊全，如使用說明書、產品合格證、安裝配件等；燈具安裝后，供電前應檢查燈具的接線方式是還正確，安裝是否牢固，確保安全后才可正常供電；安裝及更換燈泡時，應使用相同類型、功率的燈泡，如果改變燈泡類型或功率，應更換相應配套的鎮流器；燈具表面有一定的溫升，屬正常現象；透明件中心溫度較高，不得觸摸；光源冷啟動時間為(3～10)分鐘，燈泡在高溫狀況下不能重啟動屬正常現象，建議等燈泡稍微冷卻后再啟動；拆裝、維護燈具時，應由人員操作，發現有不正常現象應斷電報修，不是專職維修人員不準擅自進行維修；操作前必須先斷開電源，同時確保燈具可靠接地。

NFC9100防眩棚頂燈的使用

　　根據現場環境和照明需要，確定適當的安裝方式。并根據燈具到220V電源接點的距離準備相應長度的φ8~φ10mm三芯電纜線。吸頂式安裝：使用2個M8的膨脹螺釘打在天花板或者M8的普通螺栓固定在支撐梁上；嵌入式安裝：直接使用4個M6的螺絲固定在燈具四角的安裝螺孔固定燈具。裝好支架后，擰開燈腔和鎮流器腔的鎖緊螺絲，并掀開燈殼(吸頂方式，吊頂安裝)或者鎮流器殼(螺絲固定嵌入式)，把三芯電纜穿過防水葛蘭接頭，對應接在有極性標識的接線座上。注意，請務必將進線電纜使用壓線卡鎖緊，防止拔脫。嵌入吊頂安裝方式，在吊起燈具后先進線連接再定位燈具。更換燈泡時，先斷開電源，擰開燈具正面固定玻璃面板上的螺絲，通過吊鏈結構，將面板輕吊在燈殼上，即可旋下舊燈泡，換上新燈泡。更換其他電氣元件，請打開鎮流器腔，即可更換任何電氣元件。

NFC9100防眩棚頂燈品質保證

　　嚴格按照ISO9001:2000國際質量管理體系標準進行質量控制,確保NFC9100防眩棚頂燈質量高于國家標準,完全達到設計要求,NFC9100防眩棚頂燈實行3年保用,光源保用1年,自購買之日起3年內，NFC9100防眩棚頂燈正常使用下出現任何故障由日升照明負責維護。

英文釋義：

The supply of high quality NFC9100 anti-dazzle studio lamps

Wholesale NFC9100 anti-dazzle studio lamps manufacturers

NFC9100 anti-dazzle studio lamps manufacturers contact:

Phone [ ]:02 Miss Hu

Website: https://www.jxfb.cn/, https://www.jexfb.com/

Yueqing Ju Xiang explosion-proof electric appliance Limited company began in 1988, until today, always adhere to the " user to

, quality first, reasonable price, the integrity of service "purposes, to win the broad masses of old and new customers.

To praise, our company is a production, wholesale sales of integrated companies, the company production

Products affordable, high quality, using imported raw materials in Chinese and Western technology policy system, it is

Many customers buy our goods are good!

If you need, please contact us as soon as possible, our company has different price of the same product

Products with different brands, different light source, the light source is brand of different high and low price.

Thank you for your cooperation, hope to cooperate more enjoyable!!

NFC9100 anti-dazzle studio lamps applicable scope

NFC9100 anti-dazzle studio lamps applicable to gas station, railway, mining, power plants and other indoor and outdoor venues lighting fixtures.

Name: anti-dazzle studio lamps

Model: NFC9100

Brand: giant Cheung explosion-proof

NFC9100 anti-dazzle studio lamps Performance Characteristics

The 1 advanced through the light distribution design and special processing technology, soft and uniform light, no glare, average service life of 10000 hours.

2 high strength aluminum alloy shell and optimized structure design, has the ability of resistance to shock. Optimized structure design and high-tech surface spraying technology, compact structure, beautiful appearance, convenient installation can be embedded and ceiling and other installation method.

The 3 transparent pieces of imported FD plastic materials, high degree of transparency. The lamp body using high strength alloy material by high-tech surface treatment, corrosion resistance, impact resistance, no rust; can be in a harsh environment for long-term use.

Independent cavity structure design, good heat dissipation, greatly improving the life of lamps; the maintenance is convenient, simple.

4 has the advantages of compact structure, beautiful appearance, convenient installation can be embedded and ceiling and other installation method.

5.A, B two light distribution design, in which A is a symmetrical light distribution design, type B for the asymmetric light distribution in two models, according to different site lighting needs of choice.

NFC9100 anti-dazzle studio lamps technical parameters

Rated voltage: 220VAC 50Hz

( source: MH gas discharge, or HPS gas discharge )

Rated power: 75W / 150W

Protection grade: WF2

Protection grade: IP65

Dimensions: 300 x 300 x 205mm

Luminous flux: 6000LM 9500LM

NFC9100 anti-dazzle studio lamps matters needing attention

Receipt please check carefully in the process of transportation whether product damage phenomena, such as shell scratch, crack, glass and products after the opening of the broken bulb; please check the package box attachment is complete, such as the use of brochures, product certification, installation and other accessories; lighting installation, power should be checked before lighting wiring means is also correct, are firmly installed, ensure safety only after the normal power supply; installation and replacement bulbs, should use the same type, power bulbs, if change the bulb type or power, we should replace the corresponding matching ballast; lighting surface has a certain temperature, it is a normal phenomenon; the transparent parts center temperature high, do not touch the cold start time; the light source ( 3～ 10 ) minutes, bulb in high temperature can not restart is a normal phenomenon, suggestions bulb slightly cooled restart; disassembly, maintenance lights, the operation should be professionals, found to have abnormal phenomenon is not a full-time power repair, repair personnel are not allowed to unilaterally repair; before operation must first disconnect the power, at the same time to ensure that the lighting of reliable grounding.

NFC9100 anti-dazzle studio lamps use

According to the site environment and lighting needs, determine the appropriate installation mode. According to the lamps to 220V power supply contact distance to prepare the corresponding length of φ 8~ φ10mm three core cable. Ceiling type mounting: using 2 M8 expansion bolt hit the ceiling or M8 common bolt is fixed on the supporting beam; embedded installation: directly using 4 M6 screws in the four corners of the mounting screw fixed lighting lamps. Install bracket, unscrew lamp and ballast cavity cavity locking screws, and turn the lamp (ceiling, ceiling installation ) or the ballast shell ( screws embedded ), the three core cable waterproof joint through the glen, correspondingly connected in polarity marking the connection seat. Attention, please make sure the cable lines into the use of line card lock, prevent pulling. Embedded ceiling installation, lift the lamps in advanced line connecting the positioning fixture. Replacement bulbs, first disconnect the power supply, unscrew lamp is fixed on glass panel by screws, chain structure, the panel light hanging in the lamp shell, then unscrew the old light bulbs, and replaced with a new bulb. The replacement of other electrical components, please open the ballast cavity, can replace any electrical components.

NFC9100 anti-dazzle studio lamps quality assurance

In strict accordance with the ISO9001:2000 international quality management system standards for quality control, ensure that the NFC9100 anti-dazzle shed light quality is higher than the national standards, fully meet the design requirements, NFC9100 anti-dazzle studio lamps in place for 3 years warranty, the light source is guaranteed for 1 years, since the date of purchase of 3 years, NFC9100 anti-dazzle studio lamps under the normal use of any failure by sunrise lighting is responsible for free maintenance.