產品名稱：Agilent頻譜儀8595E
品牌：Agilent
型號：8595E

性能
輸入阻抗:50Ω
頻率：9KHz
頻率：6.5 GHz
零跨度：YES
小跨度：10KHz
跨度：6.5GHz
小掃描時間：20ms
掃描時間：100s
小分辨率帶寬1 kHz時
分辨率帶寬：3MHz
分辨率帶寬步驟：1/3/10
小的視頻帶寬：1 Hz
視頻帶寬：1 MHz
視頻帶寬步驟：1/3/10
小的單邊帶噪聲為：-105 dBc / Hz
單邊帶噪聲：-90 dBc / Hz
安全AC輸入：1 dBm
直流輸入向：0 V
小顯示的平均噪聲：-127 dBm
顯示的平均噪聲達：-110 dBm
振幅的不確定性：3％
觸發源 ：External,Internal
連接器類型（主信號）：N型（F）
CAL輸出連接器類型：BNC（F）
探頭電源：YES
外部參考頻率：10MHZ
噪聲源驅動器：NO
描述
Agilent Technologies 8595E Portable Spectrum Analyzer, 9kHz to 6.5 GHz

The Agilent Technologies 8595E spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Agilent Technologies 8595E. The CRT displays received signal strength (y-axis) against frequency ( x-axis).

Some applications for Agilent Technologies 8595E Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a Agilent Technologies 8595E spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the Agilent Technologies 8595E spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components

Agilent 8595E是易于使用的RF頻譜分析儀，它具有很寬的性能特性范圍，可選符合您測量要求的能力。可的測量專用件與可選的插卡性能相結合，提供適合您應用的量身定制解決方案。

 
用支持各種應用，如有線電視/廣播、元件測試、電磁兼容性、光波和無線應用的
測量專用件快捷地執行復雜的測試
4 槽的插卡槽
屏幕分割顯示
單鍵測量例程
先進測量功能
雙接口
內置跡線發生器
E4444A BenchLink 軟件 E4444A BenchLink 軟件