■對應各國的粗度規格表示機。
■大型LCD屏幕窗口，易于清晰讀取。
■使用觸控式面板（具污性），操作簡易。
■可將數據儲存于記憶卡（選購品）。
■任意長度設定機能。
■按PRINT鍵即可藉由內藏式打印機打印出量測之結果（可選擇不同之打印方式）。
■內藏充電電池，本體攜帶方便也可收置檢出器。
■擁有豐富的參數：自動校正機能、統計處理、合否判定機能、客戶自行編輯設計機能判定機能
平移范圍12.5mm（5"）
測量范圍300μm（&plun;150μm）[12000μinch（&plun;6000μinch）]
驅動/檢測元件探測儀:178-390/178-395
測頭:金剛石
測量力:4mN/0.75mN
探測方式:微感應
評定輪廓P，R
估計參數Ra,Ry,Rz,Rt,Rp,Rq,,S,Pc,P3z,mr
數字過濾2CR-75%,2CR-75% PC,Gaussian-50%
截至λC 0.25,0.8,2.5mm
波長λS 2.5,8μm
取樣長度（L）0.25,0.8,2.5mm
顯示LCD
打印機－－－－
放大垂直－－－－
倍數水平－－－－
數據輸出通過RS232C接口/SPC輸出
電源通過AC適配器/電池（可充電）
尺寸62&tim;156.5&tim;52mm
重量0.48kg
| Seri SJ seri | |
| FEATUR: Technical Data X-axis (drive unit) Measuring range: .49" (12.5mm) Measuring speed: .01", .02"/s (0.25, 0.5mm/s) .01"/s (0.25mm/s: S-te) Traversing direion: Backward Deteor Range: 13780µin (-7880µin to+5900µin) {350µm (-200µm to +150µm)} Deteing method: Skid measurement Measuring force: 4mN or 0.75mN (low force te) Stylus tip: Diamond, 90°/5µmR (60¨¬/2µmR: low force te) Skid radius of curvature: 40mm Skid force: ls than 400mN Deteing method: Differential induance Power supply: Via AC adapter / rechargeable battery Battery life: Max. 600 measurements (w/o printing) Recharge time: 15 hours Data output Via RS-232C interface / SPC output Dimensions (WxDxH) Control unit: 6.7 x 2.4 x 2.0" 156.5 x 62 x 52mm} (SJ-201) 4.5 x .90 x 1.02" Drive unit: 115 x 23 x 26mm M Control unit: Approx. 0.3kg (SJ-201) Drive unit: 0.2kg Evaluation Capability: SJ-201 Applicable standard: JIS"82, JIS"94, JIS"01, DIN, ISO, ANSI sed profile: Primary profile le (P), Roughns profile (R), DIN4776 (Primary profile (P), Roughns profile (R), MOTIF (R):M-te) Evaluation parameters: Ra, Ry, Rz, Rq, S, , Pc, R3z, mr (c), Rt, Rp, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo (can be customized) (R, AR, Rx: M-te) Dial filter 2CR, PC75, Gaussian Cut-off length ëc: .01, .03, .1" (0.25, 0.8, 2.5mm) ës: 1", .3" (2.5, 8mm). Number of sampling length: X1, X3, X5 Arbitrary length: .01"&plun; to .49"&plun; (0.3 to 12.5mm) .01"&plun; (0.1mm) increments Sampling length (L): .01, .03, .1" (0.25, 0.8, 2.5mm) Funion Customization: Dired parameters can be seleed for calculation and display.GO/NG judgment: Upper / lower limit setting: 2 parameters Measurement conditions saving: Sav the conditions when the power is turned off. Data saving: A maximum of 10 measurement rults can be saved. Calibration: Auto-calibration with the entry of numerical value Power saving funion: If the auto-power-off funion is ON then power turns off if no operation for 30 seconds. AC adapter:526688A Battery pack:12BAA240 |
