TE
CHARAERISTICS
RJ 45 10/100 BASE-TX TRANSFORMER JACK WITH TRANSFORMER
IMPEDANCE RISTOR / HIGH VOLTAGE CAPACITOR.
SIZE SAME AS RJ-45 MODULAR JACK TO SE PCB SPACE.
REDUCE EMI RADIATION, IMPROVE EMI PERFORMANCE.
DIGNED FOR NETWORK INTERFACE CARD ASPPLICATION.
DIGNED TO MEET IEEE 802.3U REQUIREMENT.
DIGNED FOR 100 BASE TRANSMISSION OVER UTP-5 CABLE.
ELERICAL
INSERTION LOSS: 1-100MHZ -1.0 DB MAX.
  1-30MHZ -18DB MIN. LOAD 100 OHMS
RETURN LOSS: 30-80MHZ -12DB MIN. LOAD 100 OHMS
CROSS TALK: 30MHZ – 40DB TYP.
  60MHZ – 35DB TYP.
  100MHZ – 30DB TYP.
CMRR: 1-50MHZ – 30DB TYP.
  50-130MHZ -20DB TYP.
TURN RATIOS: RX=1:1(+/-3%) TX=1:1(+/-3%)
ISOLATION 60HZ: INPUT TO OUTPUT 1500VRMS, 60 SECONDS
PRIMARY INDUANCE: @100KHZ 0.1VRMS.8MA DC BIAS 350UH MIN.
MECHANICAL
HOUSING MATERIAL: HIGH TEMP. UL94V-0.
CONTA MATERIAL: PHOSPHOR BRONZE T=0.35MM
PLATING: GOLD PLATING OVER NICKEL.
OPERATING LIFE: 750 CYCL MIN.
PCB RETENTION PRE-SOLDER: 1 LB MIN.
PCB RETENTION POST-SOLDER: 10 LBS MIN.
ENVIRONMENTAL
STORAGE TEMPERATURE: -40℃ TO +85℃
OPERATION TEMPERATURE:0℃ TO +70℃
WE SOLDERING TEMPERATURE: 230℃~250℃(3~5 SECONDS)
MAT WITH MODULAR PLUG CONFORMING TO FCC PART 68, SUBPART F.