GC- 5003橡塑低溫脆性測定儀測定硫化橡膠在規定條件下試樣受沖擊出現破壞時的溫度，即為脆性溫度，可以對非硬質塑料及其他彈性材料在低溫條件下的使用 性能作比較性鑒定?？梢詼y(cè)定不同橡膠材料或不同配方的硫化橡膠的脆性溫度和低溫性能的優劣。因此無論在科學研究材料及其制品的質量檢驗，生產過程的控制等 方面均是的。本儀器是根據GB1682-82標準設計的，各項技術指標合標準的要求。
GC- 5003 plastics brittle low-temperature tester vulcanized rubber under specified conditions of sample temperature impact appeared at failure, namely the brittle temperature, can be compared to identify the properties of non rigid plastics and other elastic material at low temperature. Can be used for the determination of different rubber materials or different formulations of vulcanized rubber brittle temperature and low temperature performance. Therefore, both in the quality inspection and scientific research materials and products, production process control are necessary. The instrument is designed according to the national standard GB1682-82, various technical indicators in line with national standards.
橡塑低溫脆性測定儀產品參數
Low temperature brittle plastic product parameters tester
試驗溫度 -70℃–0℃
The test temperature -70 ℃ - 0 ℃
沖擊速度 2m/s&plun;0.2m/s
Impact velocity 2m/s &plun; 0.2m/s
恒溫后試驗3min時間內溫度波動 ＜&plun;0.5℃
After the test of 3min time constant temperature fluctuation in < &plun; 0.5 ℃
沖擊器中心到夾持器下端距離 11&plun;0.5mm
The impactor center to the holder is a distance of 11 &plun; 0.5mm
外型尺寸 720x700x1380mm
Dimension 720x700x1380mm
功率 1100W
Power 1100W
冷井容積 700ML
Cold well volume 700ML
更多與橡塑低溫脆性測定儀產品相關歡迎您來電咨詢 電話
More instrument products related to welcome determination and low temperature brittleness rubber your call phone