FHS  40-P/SP600  transducer

The Minisens transducer is an ultra flat D open loop integrated circuit current transducer based on the Hall effect principle. It is suitable for the electronic measurement of currents: DC, AC, pulsed, mixed. It has no insertion loss and provides galvanic isolation between the primary circuit (high power) and the secondary circuit (sensor). It measures the magnetic field generated by the current flowing in a conductor such as a PCB track. The output voltage is proportional to that magnetic field.

The IC is calibrated to minimize offset and temperature drifts. An integrated magnetic circuit gives an optimum transducer sensitivity. High isolation between the primary circuit and transducer electronics can be obtained with a double sided PCB.

This datasheet is for a device programmed for maximum sensitivity: other options will be available. For example, the sensitivity range will be adjustable, and a choice of fixed or ratiometric (proportional to power supply voltage) sensitivity and reference voltage will be offered.

Features 

Programmable Hall effect transducer for current measurement application up to &plun; 100 A

5 V power supply

Standard S0IC 8 pin package

Magnetic field measurement range &plun; 3.3 mT Sensitivity range up over to 200 mV/A

Isolated current measurement.

Advantages

Low cost all  size Excellent linearity

No power loss in primary circuit

Internal or External reference voltage may be used on the same pin

Standby mode for reduced power consumption

Additional output for fast detection with response time 3 µs.

Applications

Motor control

Power meter

Uninterruptible Power Supplies (UPS) Switched Mode Power Supplies (PS) Overcurrent fault protection

Threshold detection Garage door openers Window shutters Motors and fans

Air conditioning

White goods.

.

 Standard

EN 50178.

Application  Domain

Industrial.