LED驅動IC，原裝，現貨庫存





TNY274-280
TinySwitch-III
Family
Energy Ef?cient, Off-Line Switcher with
Enhanced Flexibility and Extended Power Range
Figure 1. Tical Standby Application.
Produ Highlights
Lowest System Cost with Enhanced Flexibility
• Simple ON/OFF control, loop compensation needed
• Seleable current limit through BP/M capacitor value
- Higher current limit extends peak power or, in open
frame applications, maximum continuous power
- Lower current limit improves ef?ciency in enclosed
adapters/chargers
- Allows optimum TinySwitch-III choice by swapping
devices with other circuit redesign
• Tight I2f parameter tolerance reduces system cost
- Maximizes MOSFET and magnetics power delivery
- Minimizes max overload power, reducing cost of
transformer, primary clamp & secondary components
• ON-time extension – extends low line regulation range/
hold-up time to reduce input bulk capacitance
• Self-biased: bias winding or bias components
• Frequency jittering reduces EMI ?lter costs
• Pin-out simpli?es heatsinking to the PCB
• SOURCE pins are elerically quiet for low EMI
Enhanced Safety and Reliability Features
• Accurate hysteretic thermal shutdown proteion with
automatic recovery eliminates need for manual reset
• Improved auto-restart delivers <3% of maximum power
in short circuit and open loop fault conditions
• Output overvoltage shutdown with optional Zener
• Line under-voltage dete threshold set using a single
optional resistor
• Very low component count enhances reliability and
enables single-sided printed circuit board layout
• High bandwidth provides fast turn on with overshoot
and excellent transient load response
• Extended age between DRAIN and all other pins
improves ?eld reliability
Ecoart®– Extremely Energy Ef?cient
• Easily meets all global energy ef?ciency regulations
• -load <150 mW at 265 VAC without bias winding,
<50 mW with bias winding
• ON/OFF control provides constant ef?ciency down to
very light loads – ideal for mandatory CEC regulations
and 1 W PC standby requirements
Applications
• Chargers/adapters for cell/cordless phones, PDAs, dial
cameras, MP3/portable audio, shavers, etc.
®
February 2006
Table 1. tes: 1. Minimum continuous power in a tical nventilated
enclosed adapter measured at 50 °C ambient. Use of an
external heatsink will increase power capability 2. Minimum peak
power capability in any design or minimum continuous power in an
open frame design (see Key Application Considerations). 3. Packages:
P: DIP-8C, G: D-8C. See Part Ordering Information.
• PC Standby and other auxiliary supplies
• DVD/PVR and other low power set decoders
• Supplies for appliances, industrial systems, metering, etc.
Description
TinySwitch-III incorporates a 700 V power MOSFET, oscillator,
high voltage switched current source, current limit (user
seleable) and thermal shutdown circuitry. The IC family uses
an ON/OFF control scheme and offers a design ?exible solution
with a low system cost and extended power capability.
OUTPUT POWER TABLE
PRODU3
230 VAC &plun;15% 85-265 VAC
Adapter1 Peak or Open
Frame2 Adapter
1 Peak or
Open
Frame2
TNY274 P or G 6 W 11 W 5 W 8.5 W
TNY275 P or G 8.5 W 15 W 6 W 11.5 W
TNY276 P or G 10 W 19 W 7 W 15 W
TNY277 P or G 13 W 23.5 W 8 W 18 W
TNY278 P or G 16 W 28 W 10 W 21.5 W
TNY279 P or G 18 W 32 W 12 W 25 W
TNY280 P or G 20 W 36.5 W 14 W 28.5 W
PI-4095-082205
Wide-Range
HV DC Input D
S
EN/UV
BP/M
++DC
Output
TinySwitch-III