TE-81M12 多用途光纖熔接機(可熔接芯數達12芯)
住友光纖熔接機81M12,住友熔接機貿易商住友光纖熔接機住友
12芯光纖的熔接時間需14秒
雙聯自動加熱器作業效率
全屏導航觸摸界面實現簡單操作住友光纖熔接機81M12,住友熔接機貿易商住友光纖熔接機住友
、便捷、
12芯光纖的熔接時間約14秒，并且自動雙聯加熱器實現加熱補強時間約45秒(使用FPS-6熱縮管的情況下)，其加熱器是業界的功能，在中國擁有。
人性化的全屏導航觸摸界面和直觀的圖形用戶界面
熔接機內置幫助視頻，可在主機顯示屏上播放
進一步了振、水、塵以及風等特性
可通過互聯網進行軟件升級和遠程診斷住友光纖熔接機81M12,住友熔接機貿易商住友光纖熔接機住友
規格參數
TE-81M12 住友光纖熔接機81M12,住友熔接機貿易商住友光纖熔接機住友| Applicable optical fiber | Material | Silica Gl |
|---|---|---|
| Profile te | Single Mode Fiber (SMF)/ITU-T G652 Multi Mode Fiber (MMF)/ITU-T G651 Dispersion Shifted Fiber (DSF)/ITU-T G653 Non-Zero Dispersion Shifted Fiber (NZ-DSF)/ITU-T G655, G656 Bend Insensitive Fiber (BIF)/ITU-T G657 | |
| Number of fiber *1 | 1c, 2c, 4c, 5c, 6c, 8c, 10c, 12c | |
| Cladding diameter | φ125 μm | |
| Coating diameter *2 | Single: 250 μm, 500 μm, 900 μm Ribbon fiber thickness: 280-400 μm | |
| Cleave length | 10mm | |
| Applicable cable | 0.25mm primary coated 1-fiber drop cable | 3.1mm or 2.6mm×2.0mm (Excluding messenger steel wire) |
| 0.25mm primary coated 1-fiber indoor cable | 2.0mm×1.6mm | |
| Physical Characteristics | Size (Main body) | 120W×154D×130H(mm) *3 (4.7W×6.0D×5.1H(inches)) |
| Weight | Approx. 2.0 kg (With Battery pack BU-11) | |
| Display size | 4.1" touch screen color LCD display | |
| Power Conditions | Power consumption | Max. 80W |
| AC operation | With AC adapter ADC-1430S Input: AC 100-240V 50/60Hz 1.1A | |
| DC operation | Input: DC 10-15V, 4.5A | |
| Battery operation | (With BU-11) 11.1V (4600mAh) | |
| DC output | 12V For Sumitomo’s hot jacket remover | |
| In - Out Terminal | Serial port | U 2.0 mini-B te |
| Storage media | SD / SDHC memory card | |
| Splice Performance at room temperature (25°C) | Splice loss (tical)*4 | SMF : 0.05 dB MMF: 0.02 dB DSF : 0.08 dB NZDSF : 0.08 dB |
| Screening load (tical) | 1.96N - 2.09N (at stage) | |
| Splice time (tical) | Approx. 14 seconds (SMF8-12c) Approx. 12 seconds (SMF4c) Approx. 9 seconds (SMF1c) | |
| Splice & Heat cycles | Approx. 160 cycles *5 | |
| Splice program | Maximum 200 fusion programs can be selected and customized. | |
| Splice data storage | 10,000 splices | |
| Splice image capture | 64 splices | |
| Heater Performance | The number of heaters | 2 built-in heaters are available |
| Sleeve length | Up to 60mm | |
| Protection sleeve | Fiber protection sleeve | |
| Up to 60mm sleeve | 60mm for single fiber (FPS-1, FPS-61-2.6) 40mm for ribbon up to 8c fiber (FPS-5) 40mm for ribbon up to 12c fiber (FPS-6, FPS-M12) Protection sleeve for Splice-on Connector(Single Fiber connector only) | |
| Heating time(tical)*6 | Approx. 45 seconds. (40mm for 12c fiber) | |
| Heating Program | Max. 100 settings | |
| Environmental Conditions and Power Conditions | Operating temperature | -10 to +50°C |
| Storage temperature | -40 to +80°C | |
| Humidity | 0 to 95%RH with no dew present | |
| Altitude | Up to 3,660 m | |
| Environmental Durability | Shock resistance*7 | Drop from 76cm on 5 faces (Excluding face) |
| Water resistance*7 | Equivalent to IPx2 (Operates normally after being exposed to water ping at 3mm/min. for at least 2.5 min on each of 4 surfaces tilted at 15 degree.) | |
| Dust resistance*7 | Equivalent to IPx5 (Operates normally after 8 hours in a dust chamber containing dust of particle size 75 um or below) |
住友光纖熔接機81M12,住友熔接機貿易商住友光纖熔接機住友
*1 光纖夾具需要合涂覆層光纖和光纖芯數的要求。
*2 光纖夾具不能用于松套管光纜。*3 突出的部分不包括在內。住友光纖熔接機81M12,住友熔接機貿易商住友光纖熔接機住友*4 在室溫條件下，用住友同種光纖以ITU-T和IEC標準的切斷法測得。
*5 循環次數根據電池狀態和操作環境不同也會隨之變化。
*6 使用住友生產的保護套管在室溫條件下，供電為AC電源適配器。
*7 住友對電池性能進行了試驗和確認，但不本產品受損情況下的狀態。
通訊主要產品：光纖熔接機，光時域反射儀，2M誤碼測試儀，光纜普查儀，光功，光源，插回損測試儀，光纖尋障儀等，代理品牌有：住友光纖熔接機81M12,住友熔接機貿易商住友光纖熔接機住友，藤倉，古河，康未，一諾，相和，瑞研，信測，諾克，安立，EXFO，JDSU,羅意斯，橫河；
