針對市場上很多假冒德國優圖UV-DESIGN公司生產的UV能量計，UV-DESIGN生產的所有產品都有以下Logo, 謹防上當假冒產品采用國產傳感器，測量數據不穩定，測量出來的數據相差幅度大，而且假冒能量計,每兩­叁個月就要校準。嚴重影響德國優圖UV-DESIGN公司的聲譽.真假識別方法請查詢以下網址  UV-Probe Integrator Multi (ComPort)
+ up to 4 UV-sensors
+ up to 4 different UV-bands
+ UV intensity mW/cm2
+ UV peak intensity mW/cm2
+ UV dose mJ/cm2
+ USB ComPort (Option)
+ graphic chart on computer (Option)
The UV-Probe Integrator Multi is a self-contained, high quality UV measuring instrument. It is designed to
measure and display UV intensity in mW/cm2. An additional function is the scan of the peak value of UVintensity
in mW/cm2 and to measure the UV dose in mJ/cm2 within a pre-set period of 30/60 seconds.
It is able to automatically detect up to four different UV-sensors in up to four different UV-bands (UV-A,
UV-B, UV-C, UV-Diazo or full UV)
Extra sensors (up to three) should be ordered right with the initial purchase in order to calibrate sensors to
the base unit. Due to its UV sensor(s) and the integrated microprocessor the UV-Probe Integrator Multi
can measure and display the peak UV-energy of up to four different UV bands (mW/cm2).
Additionally, this UV-Probe Integrator Multi is calculating the UV-dosage (mJ/cm2) of the UV energy
supplied during the time of exposure of one measuring cycle. The UV-dosage is calculated as the total
Integral of UV-dosage over the UV spectral band of the respective sensor connected.
The removable, probe-type sensors are connected to the base unit by a cable of approx. 1 meter (40”)
length. In the function “Direct” the actual UV-intensity in mW/cm2 supplied to the sensor is measured. The
function “Scan” will start a 30 second measuring cycle of both, UV-intensity and UV-dose. After
completion of the measuring cycle the measuring results can be scrolled through on the built in 2 x 16
digit LCD display.
A special AUTO-OFF feature that turns off the unit automatically after one minute serves as energy
saving and extension of the battery service life.
Optionally, this microprocessor integrator is available with an USB ComPort and an evaluation software
for downloading the data to a computer to show, edit and store a history of the measuring results of the
entire measuring cycle as graphic and numeric charts (mW/cm2) and (mJ/cm2)
The UV-Probe Integrator Multi (ComPort) is available in five different measuring ranges:
Item 33.1.1 UV-Probe Integrator Multi, Type 1 UV-V (Diazo) 350 – 460 nm
Item 33.1.2 UV-Probe Integrator Multi, Type 2 UV-A 315 – 400 nm
Item 33.1.3 UV-Probe Integrator Multi, Type 3 UV 230 – 410 nm (STD)
Item 33.1.4 UV-Probe Integrator Multi, Type 4 UV-B 280 – 315 nm
Item 33.1.5 UV-Probe Integrator Multi, Type 5 UV-C 230 – 280 nm
Extra sensors are avaliable as follows:
Item 33.2.1 Sensor Type 1 UV-V (Diazo) 350 – 460 nm
Item 33.2.2 Sensor Type 2 UV-A 315 – 400 nm
Item 33.2.3 Sensor Type 3 UV 230 – 410 nm
Item 33.2.4 Sensor Type 4 UV-B 280 – 315 nm
Item 33.2.5 Sensor Type 5 UV-C 230 – 280 nm
UV-ComPort Probe Integrator Multi
Item 33.4.1 UV-ComPort Probe Integrator Multi, Type 1 UV-V (Diazo) 350 – 460 nm
Item 33.4.2 UV-ComPort Probe Integrator Multi, Type 2 UV-A 315 – 400 nm
Item 33.4.3 UV-ComPort Probe Integrator Multi, Type 3 UV 250 – 410 nm
Item 33.4.4 UV-ComPort Probe Integrator Multi, Type 4 UV-B 280 – 315 nm
Item 33.4.5 UV-ComPort Probe Integrator Multi, Type 5 UV-C 230 – 280 nmUV-Probe Integrator Multi (ComPort)
Technical Data:
Spectral ranges: UV 230 – 410 nm (Standard) or other以上是德國uv能量計的詳細信息，如果您對德國uv能量計的價格、廠家、型號、圖片有什么疑問，請聯系我們獲取德國uv能量計的新信息。