| MODEL | 7130 | 7132 | 7140 | 7142 | ||||||
| AC WITHSTAND VOLTAGE | ||||||||||
| Output Rating | 5KVAC/20mA | |||||||||
| Range | Resolution | Accuracy | ||||||||
| Output Voltage，KVAC | 0-5.00 | 0.01 | ±( 2% of setting +5V ) | |||||||
| Output Frequency | 50Hz/60Hz±100ppm，User Selection | |||||||||
| Output Waveform | Sine Wave，THD<2%( Resistion Load )，Crest Factor = 1.3-1.5 | |||||||||
| Output Regulation | ±( 1% of output +5V )，Form no load full load | |||||||||
| SETTINGS | ||||||||||
| Max-Limit AC Current，mA | 0-20.00 | 0.01 | ±( 2% of setting +2counts ) | |||||||
| Min-Limit AC Current，mA | 0-9.999 | 0.001 | ±( 2% of setting +2counts ) | |||||||
| Ramp Time，second | 0-999.9 | 0.1 | ±( 0.1% + 0.05sec ) | |||||||
| Dwell Time，second | 0，0.3-999.9 | 0.1 | ||||||||
| ( 0=continuous ) | ||||||||||
| Arc Detection | 0，1-9 ranges ( 0=OFF，9 is the most sensitivity ) | |||||||||
| DC WITHSTAND VOLTAGE（7140，7142 ONLY） | ||||||||||
| Output Rating | 6KVDC/7500uA | |||||||||
| Output Voltage，KVDC | 0-6.00 | 0.01 | ±( 2% of setting +5V ) | |||||||
| Output Ripple | < 5% ( 6KV/7500uA at Resistive Load ) | |||||||||
| SETTINGS | ||||||||||
| Max-Limit DC Current，uA | 0-7500 | 1 | ±( 2% of setting +2counts ) | |||||||
| Min-Limit DC Current，uA | 0-999.9 | 0.1 | ±( 2% of setting +2counts ) | |||||||
| Ramp Time，second | 0.1-999.9 | 0.1 | ±( 0.1% + 0.05sec ) | |||||||
| Dwell Time，second | 0，0.4-999.9 | 0.1 | ||||||||
| ( 0=continuous ) | ||||||||||
| Arc Detection | 0，1-9 ranges ( 0=OFF，9 is the most sensitivity ) | |||||||||
| Discharge Time | ≦200msec | |||||||||
| 7130/7132/7140/7142數位合成型耐壓/絕緣測試儀 | ||||||||||
| MODEL | 7130 | 7132 | 7140 | 7142 | ||||||
| INSULATION RESISTANCE ( 7132，7142 ONLY ) | ||||||||||
| Output Rating | 1KVDC/9999MW | |||||||||
| Output Voltage，VDC | 30-1000 | 10 | ±( 2% of setting +3V ) | |||||||
| SETTINGS | ||||||||||
| Max-Limit Resistance，MW | 0，1-9999（0=OFF ) | 1 | ±(2% of setting +2counts) at 500-1000VDC，1-1000M | |||||||
| Min-Limit Resistance，MW | 1-9999 | 1 | ±(5% of setting +2counts) at 500-1000VDC,1000-9999M | |||||||
| ±(8% of setting +2counts) at 30-500VDC,1-1000M | ||||||||||
| Ramp Time，second | 0.1-999.9 | 0.1 | ± ( 0.1% + 0.05sec ) | |||||||
| Dwell Time，second | 0，1.0-999.9 | 0.1 | ||||||||
| Delay Time，second | 0，0.5-999.9 | 0.1 | ||||||||
| ( 0=continuous ) | ||||||||||
| GENERAL | ||||||||||
| Input Voltage AC | 115/230VAC±15%，50/60Hz±5%，Fuse 3.15A Fast | |||||||||
| PLC Remote Control | Input: Test，Reset，Memory1.2.3，Interlock | |||||||||
| Output: Pass，Fail，Processing | ||||||||||
| Interface( Option ) | RS485 Interface | |||||||||
| Memory | 10memories，3 steps/Memory | |||||||||
| Display | 128×64 Graphic LCD | |||||||||
| Safety | Built-in Smart GFI trip current 450uA max，HV shut dowm speed : <1mS | |||||||||
| Key Lock | To prevent unauthorized alteration of test parameters | |||||||||
| Calibration | Build-in software and external calibrated meters | |||||||||
| Verification | Build-in software driven verification menu to test fault detection circuits | |||||||||
| Alarm Volume Setting | Range : 0-9;0=OFF，1 is softest volume，9 is loudest volume | |||||||||
| Environment | 0-40℃，20-80%RH | |||||||||
| Dimension/Net Weight | 215mm(W)×89mm(H)×370mm(D)/10Kg | |||||||||
| ※Ordering Information※------------------------------------------------------------------------------------ | ||||||||||
| 7130 AC Withstand Voltage Tester | ||||||||||
| 7132 AC Withstand Voltage / Insulation Resistance Tester | ||||||||||
| 7140 AC/DC Withstand Voltage Tester | ||||||||||
| 7142 AC/DC Withstand Voltage / Insulation Resistance Tester | ||||||||||
東莞市中鈦電子儀器臺灣嘉仕品牌
免企業未認證證營業執照未上傳
掃一掃
進入手機店鋪
