| MODEL | 7410 | 7420 | 7430 | 7440 |
| AC WITHSTAND VOLTAGE |
| Output Rating | 5KVAC/30mA | 5KVAC/30mA | 5KVAC/40mA | 5KVAC/40mA |
| Range | Resolution | Accuracy |
| Output Voltage，ACV | 0-5000 | 0.01 | ±( 2% of setting +5V ) |
| Output Frequency | 50Hz/60Hz±100ppm，User Selection |
| Output Waveform | Sine Wave，THD<2%( Resistion Load )，Crest Factor = 1.3-1.5 |
| Output Regulation | ±( 1% of output +5V ) |
| SETTINGS |
| Hi-Limit AC Current，mA | 0-30.00 | 0-30.00 | 0-40.00 | 0-40.00 |
| Resolution：0.001，Accuracy：±( 2% of setting +3counts ) |
| Lo-Limit AC Current，mA | 0-9.999 |
| Resolution：0.01，Accuracy：±( 2% of setting +3counts ) |
| Ramp Time，second | 0-999.9 | 0.1 | ±( 0.1% + 0.05sec ) |
| Dwell Time，second | 0，0.3-999.9 | 0.1 |
| ( 0=continuous ) |
| Arc Detection | 1-9 ranges ( 9 is the most sensitivity ) |
| AC Current Offset，mA | 0-2.000 or Auto Set |
| DC WITHSTAND VOLTAGE |
| Output Rating | 6KVDC/9999uA |
| Output Voltage，DCV | 0-6000 | 1 | ±( 2% of setting +5V ) |
| Output Ripple | < 5% ( 6KV/9999uA at Resistive Load ) |
| SETTINGS |
| Hi-Limit DC Current，uA | 0-9999 | 1 | ±( 2% of setting +3counts ) |
| Lo-Limit DC Current，uA | 0-999.9 | 0.1 | ±( 2% of setting +3counts ) |
| Ramp Time，second | 0.1-999.9 | 0.1 | ±( 0.1% + 0.05sec ) |
| Dwell Time，second | 0，0.4-999.9 | 0.1 |
| ( 0=continuous ) |
| Arc Detection | 1-9 ranges ( 9 is the most sensitivity ) |
| DC Current Offset，uA | 0-200,0 or Auto Set |
| Ramp High Current | ON/OFF，User Selection |
| Charge-Low Current，uA | 0-350,0 or Auto Set |
| Discharge Time | ≦200msec |
| INSULATION RESISTANCE |
| Output Rating | 1KVDC/9999MW |
| Output Voltage，VDC | 100-1000 | 1 | ±( 2% of setting +3V ) |
| Hi-Limit Resistance，MW | 0.1-9999（0=OFF ) | 1 | ±(2% of setting +1counts) at 500-1000VDC，1-1000MW ±(8% of setting +1counts) at 500-1000VDC,1000-9999MW ±(8% of setting +1counts) at 100-500VDC,1-1000MW |
| Lo-Limit Resistance，MW | 1-9999 | 1 |
| Delay Time，second | 0，0.5-999.9 | 0.1 | ±( 0.1% + 0.05sec ) |
| ( 0=continuous ) |
| Charge-Low Current，uA | 0-3.500 or Auto Set |
| GROOUND BOND(7440 ONLY) |
| Output Rating | 30A/600mW ，8V |
| Output AC Current | 3.00-30.00 | 0.01 | ±( 2% of setting +3counts ) |
| Output AC Voltage | 3.00-8.00 | 0.01 | ±( 2% of setting +3counts )at Open circuit |
| Output Frequency | 50Hz/60Hz±100ppm，User Selection |
| SETTINGS |
| Hi-Limit Resistance，mW | 0-150( 3-30A ) | 1 | ±( 2% of setting +2counts ) |
| Lo-Limit Resistance，mW | 0-600( 3-10A ) |
| Lead Resistance，Offset mW | 0-200 | 1 | ±( 2% of setting +2counts ) |
| Dwell Time，second | 0，0.5-999.9 sec ( 0=continuous ) | 0.1 | ±( 0.1% + 0.05sec ) |
| GENERAL |
| Input Voltage AC | 115/230VAC±15%，50/60Hz±5%，Fuse 5A Slow for7410/7412 model，6.3A Slow for7420/7430/7440 model |
| PLC Remote Control | Input: Test，Reset，( Memory1.2.3 |
| Output: Pass，Fail，Processing |
| ※Ordering Information※--------------------------------------------------------------------------------- |
| 7410 Dielectric Analyzer （ACW，DCW，IR） |
| 7420 Dielectric Analyzer with Build-in 8CH Scanner（ACW，DCW，IR） |
| 7430 Dielectric Analyzer（ACW，DCW，IR） |
| 7440 Electrical Safety Compliance Analyzer（ACW，DCW，IR，GB） |
