無線電綜合測試儀 Willtek 4032 STABILOCK
廠家: WETEK
- 0.4MHz - 2.3GHz
- 頻譜分析儀頻率范圍 0.4MHz - 1GHz
通用模擬/數字通信測試儀 4032 STABILOCK是快速、簡易地測試不同型號的移動電話的通信測試儀。按一下按鈕即可測試模擬和數字移動電話而不需要重新配置硬件。
性能指標pdf
模擬和數字移動電話的通用測試平臺。&sp;
TETRA 及TETRAPOL的測試儀解決方案。&sp;
快速、的頻譜儀分析選件。&sp;
模擬和數字無線中繼線測試功能。&sp;
對基站的測試。&sp;
適用于數字系統&sp;
＊G/PCN/PCS&sp;
＊CDMA/IS-95&sp;
＊DE&sp;
＊AMPS/IS-136&sp;
＊TETRA&sp;
＊PDC
度
完成G手機測試需60秒種。在大多數系統 （例如 G，PCN／PCS）之間 可實現方便的切換。
高
的測量了具有復驗性的、準確性的測試結果。 射頻蜂窩功率測試典型值可達5%。
擴展性能
新系統不可實施對 DE 制固定臺、移動臺的測量，也可對TETRA制及其它無線集群系統進行測量。
快速頻譜分析儀
大前頻譜分析儀， 測量范圍從 O.4MHZ到 2.3GHZ。其功能包括自動調諧，縮放和G觸發模式。
簡單的自動化過程
利用PC機編輯軟件包來生成 IEEE-488或AUTORUN程序方便，這些軟件包包括語法檢測、庫函數、存貯和程序管理程序。 靈活方便的無線綜合測試儀STABILOCK 4O32系列產品滿足了世界范圍內移動無線電通信制造商和維修機構的需求。可針對目前6種主要數字制式和30多種模擬制式無線電通信系統進行測量。靈活的模塊化結構 4032系列采用內置模塊和存貯卡，使升級變得易如反掌。 模塊化設計不保護了投資，還允許用戶隨著無線電技術的成熟或需求的變化測試新系統。借助4032一貫的屏幕布局，GPIB命令以及簡單的存貯卡軟件安裝，技術人員簡單的培訓就能使用新的模塊及功能。 適用于維修中心的測試儀該產品簡捷的設計大大了生產率，與同類解決方案相比，節省了空間，降低了重量。易讀屏幕對于人工操作來講意義重大，屏幕上的指針式顯示能夠為遠距離設備調整提供清晰的指示。清晰的布局，軟功能鍵和光標控制鍵提供了直觀的用戶界面。
適用于生產線的測試儀快速、準確的測試為數字無線電通信終端制造商提供了理想的解決方案。GPIB編程或與局域網服務器的連接靈活地實現了自動測試。AUTORUN自動執行程序，大大方便了測試工作。利用ARE編輯軟件包在PC機上進行編輯可以從廣泛的AERNA庫中快速地創建或修改自動執行程序。
方便、的基站測試
4O32系列提供AMPS，NAMPS，D-AMPS，IS-136，CDMA或 ETA CS基站測試。在許多情況下可以利用用戶自編的 AUTORUN程序來實現基站測試的自動化。 簡潔、輕巧的設計大大方便了基站安裝及維護人員。網絡維護網絡或信道出現故障時，客戶會因經濟上的損失而一籌莫展，因此維護時需分秒爭。4032系列的測量功能實現了故障的排除，因而使客戶損失大大減少。而清晰的顯示可以提供快速準確的結果。利用星圖顯示可以簡化I和Q的校準工作。小//平均值統計可以使優化更方便。快速頻譜分析儀（ 2.3GHz）提供帶內和帶外檢測， 用來識別在天線或耦合器處生成的干擾信號或內部調制。
CDMA測試
CDMA基站測試軟件可以用在8OOMHZ或1900MHZ頻段。星圖式顯示可看出調制信號的對稱性，信道功率顯示可顯示引導碼信道及話音信道功率。此外，許多檢測過程輸入射頻，而無需額外同步時鐘。 檢測內容包括信道功率，頻率容限，波形質量（rho），向量大小以及引導碼信道時間偏移，可以測量每一碼信道的時間、功率、相位。
快速的星圖
查位誤差，幅值，RMS向量 誤差，功率和ΔP/信號有助于檢查NADC/IS—54/IS—136基站故障。
清晰的顯示
數字測試可采用模擬表頭。圖形化和數字測量結果便于快速分析。
鄰近信道功率
數字顯示，簡化了信道、鄰近信道以及次鄰信道功率的分析。
綜合性能來自于硬件、軟件的配置
- G測試（手機）
1.發射功率
2.相位和頻率誤差
3.時間功率樣板及脈沖寬度
4.調制頻譜
5.手機處于測試模式下的發射測量
6.誤碼率（BER）
7.幀刪除率（ER）
8.尋呼靈敏度
9.手機測試
10.小/，平均值統計
11.音頻RMS - CDMA測試（基站）
1.信道功率
2.碼域功率
3.碼域時間
4.碼域相位
5.加性高斯白噪聲 （AWGN）源
6.波形質量（rho）
7.矢量誤差圖（星圖顯示）
8.相讓誤差
9.引導時間偏移 - IS－136測試（手機）
1.星圖顯示（圖形／數字
2.調制頻譜
3.時間功率脈沖
4.A鄰信道功率
5.誤碼率(BER）80O和1900MHZ系統
6.模擬／數字控制信道到模擬/數字TCH
7.站信道切換
8.MAHO功能
9.ACELP或VSELP
10.話音環路 - D－AMPS/NAMPS（基站）
1.功率測量
2.數字和模擬操作
3.頻譜分析儀
4.星圖顯示
5.鄰近和次鄰信道功率 - DE測試（FP，PP）
1.射頻的準確性和穩定性
2.載波：標稱TX功率
3.頻率誤差
4.調制
5.頻偏
6.飄移
7.不期望的射頻調制及干擾
8.抖動
9.上升鏈路時間
10.參考時鐘
11.音頻測量
Stabilock 4032 is an universalCommunications Tt Setfor dial and og devic.
A huge number of measuring featur.
High speral purity - very low phase ise
10 MHz reference oscillator with an aging rate of <5 x 10exp-8/month
Modulation mod: AM - FM - phase
Frequency range:0,4 MHz to 2,3 GHz
Rolution: 50 Hz (<500 MHz) - 100 Hz (500 MHz to 999.999 MHz) - 1 kHz (1 GHz to 2,3 GHz)
Output level: -122 dBm to +13 dBm (RF DIRE) or -142 dBm to -7 dBm (RF)
Rolution output level: 0,1 dB
Frequency counter
Duplex operation and power deteor
Oscilloscope and sperum yzer option
AF-voltmeter - AF-counter - Distortion meter - SINAD-meter
HP-IB (IEEE 488) and RS 232 interface
| Synthizer | &sp; |
| Speralpurity | &sp; |
| PHASEISE(25-kHz offset) | &sp; |
| f<500MHz | <-121dBc/Hz |
| f≧500MHz | <-115dBc/Hz |
| RIDUALFM | &sp; |
| f<500MHz | 4Hz(rms,CCITT-weighted) |
| f≧500MHz | 8Hz(rms,CCITT-weighted) |
| NHARMONICSPURIOUS SIGNALS>500Hz off carrier | <-55dBc |
| HARMONICS | &sp; |
| Level<-15.1dBm | <-25dBc |
| Level≧-15.1dBm | <-20dBc |
| RIDUALAM | <0.02%(rms,CCITT-weighted) |
| 10-MHzreference oscillator | |
| WARMUP TIME | <3min for frequency error <5*10-7 <10minfor frequency error10-7 |
| FREQUENCYERROR | <1*10-7(T=5 to 45℃) |
| AGING | <5/month |
| OUTPUTLEVEL | approx.0.4V(into 50Ω) |
| SYNCHRONIZATION | 10MHz,V>150mVrms(into200Ω) |
| RF Generator | &sp; |
| Carrierfrequency | &sp; |
| FREQUENCY RANGE | 0.4to 999.9999MHz |
| ROLUTION | &sp; |
| f<500MHz | 50Hz |
| f≧500MHz | 100Hz |
| FREQUENCYERROR | as reference oscillator |
| Outputlevel | &sp; |
| RF SOCKET | -142to -7dBm(max.-13dBm with AM) |
| RFDIRE SOCKET | -122 to +13dBm(max.+7dB with AM) |
| rolution | 0.1dB |
| LEVELERROR INTO 50Ω | &sp; |
| RFsocket | &sp; |
| Level≧-130dBm | <1.3dB |
| Level>-15.0dBm | <2dB |
| RFDIRE socket | &sp; |
| Level≧-110dBm | <1.6dB |
| Level>+5.0dBm | <2.5dB |
| VSWR(50Ω)RFSOCKET | <1.1 |
| EMFsetting range with out interruption(t with AM) | 0 to 15dBusable to 20dB |
| Additional level error | 0.1dBper dB |
| Modulation | &sp; |
| FM(AC-coupled) | &sp; |
| FREQUENCYDEVIATION | 0 to 40kHz |
| MODULATIONFREQUENCY(int.and ext.) | 30Hz to 30kHz |
| ROLUTION | 10Hz |
| SETTINGERROR | &sp; |
| fmod=300Hzto 3kHz | <5%+3dis |
| fmod=30Hzto 20kHz | <10%+3dis |
| DISTORTION(dev.<10kHz) | &sp; |
| fmod=300Hzto 3kHz | <1% |
| EXT.MOD.INPUT | 20kHzFM=0.707 Vrms into 600Ω |
| FM(external DC-coupled) | &sp; |
| FREQUENCYDEVIATION | 0 to 5kHz |
| MODULATIONFREQUENCY | 0 to 30kHz |
| CENTRE-FREQUENCYERROR | <100Hz +frequency error of reference oscillator |
| фM | &sp; |
| PHASEDEVIATION | 0 to 6rad(fmod*rad≧20kHz) |
| ROLUTION | 0.01rad |
| MODULATIONFREQUENCY | 200Hz to 6kHz |
| SETTINGERROR | &sp; |
| fmod=300Hzto 3kHz | <1% |
| EXT.MOD.INPUT | 20RAD фM=0.707Vrms into 600Ω |
| AM | &sp; |
| MODULATIONDEPTH | m=0 to 99.9% |
| ROLUTION | 0.1% |
| MODULATIONFREQUENCY | 30Hz to 10kHz |
| SETTINGERROR FOR M≧90% | &sp; |
| fmod=30Hzto 10kHz | <0.1*m+1di |
| DISTORTIONfor m<50% | &sp; |
| fmod=300Hzto 3kHz | <2% |
| EXT.MOD.INPUT | 50%AM=0.707Vrms into 600Ω |
| RF yzer | &sp; |
| Frequencymeasurement | &sp; |
| FREQUENCYRANGE | 2 to 999.9999MHz |
| ROLUTION | 10Hz |
| ADMISSIBLEINPUT LEVEL | &sp; |
| onRF socket | 0.1 mW to 125W |
| MEASURINGACCURACY | as reference oscillator&plun;10Hz |
| Frequency-offsetmeasurement | |
| FREQUENCY RANGE | 2to 999.9999MHz |
| MEASURINGRANGE | 0 to &plun;99.99kHz |
| ROLUTION | &sp; |
| f<10kHz | 1Hz |
| f<≧10kHz | 10Hz |
| ADMISSIBLEINPUT LEVEL | &sp; |
| on RFsocket | 2μW to 125W |
| onRF DIRE socket | 1mV to 1V(measuring range:0 to&plun;15kHz) |
| MEASURING ACCURACY | as referenceoscillatior+3Hz(+1di for offset≧10kHz) |
| RF-powermeasurement,RF-socket(broadband) | |
| FREQUENCY RANGE | 2to 999.99MHz |
| MEASURINGRANGE | 1mW to 125W(erage) |
| ROLUTION | &sp; |
| P<1W | 1mW |
| P<10W | 10mW |
| P<≧10W | 100mW |
| MEASURINGACCURACY(w/o modulation) | |
| P>200mW | <10%+1di (f=20to 500MHz) <12%+1di (f=6 to 999.9999MHz) |
| RF-powermeasurement(bandwidth approx.3MHz) | |
| FREQUENCYRANGE | 2 to 999.9999MHz |
| MEASURINGRANGE | &sp; |
| RFsocket | -45 to +37dBm |
| RFDIRE socket | -65 to +17dBm |
| MEASURINGACCURACY | 3dB |
| ROLUTION | 0.1dBm |
| Modulationmeasurement | &sp; |
| FMmeasurement,RF socket(broadband) | |
| FREQUENCYRANGE | 2 to 999.9999MHz |
| INPUTLEVEL | 0.1mW to 125W |
| MEASURINGRANGE | 0 to 25kHz |
| ROLUTION | 10Hz |
| MEASURINGACCURACY(dev.<<10kHz) | |
| fmod=300Hzto 3kHz | 5%&plun;1di&plun;peak ridual FM |
| fmod=100Hzto 10kHz | 10%&plun;1di&plun;peak ridual FM |
| DEMODULATIONDISTORTION | &sp; |
| fmod=300Hzto 3kHz | <0.5% |
| PEAKRIDUAL FM | <50Hz or <10Hz/100MHz |
| FMmeasurement,RF DIRE socket(narrowband) | |
| FREQUENCYRANGE | 2 to 999.9999MHz |
| INPUTLEVEL | -50 to -20dBm |
| MEASURINGRANGE | 0 to 10kHz(fmod*dev.<10kHz) |
| MODULATIONFREQUENCY | fmod=0 to 6kHz |
| ROLUTION | 10Hz |
| SENSITIVITY | betterthan 2mV(3kHz FM dev.,10dB SINAD,CCITT-weigthed) |
| IFBANDWIDTH | 30kHz |
| фMmeasurement,RF socket(broadband) | |
| FREQUENCY RANGE | 2to 999.9999MHz |
| INPUT LEVEL | 0.1mWto 125W |
| MEASURING RANGE | 0 to6rad(FM dev.<50kHz) |
| ROLUTION | 0.01rad |
| MEASURINGACCURACY | &sp; |
| fmod=300Hzto 3kHz | 6%&plun;2dis |
| fmod=200Hzto 10kHz | 10%&plun;2dis |
| DEMODULATIONDISTORTION | &sp; |
| fmod=300Hzto 3kHz | <0.5% |
| фMmeasurement,RF DIRE socket(narrowband) | |
| FREQUENCYRANGE | 2 to 999.9999MHz |
| INPUTLEVEL | -50 to -20dBm |
| MEASURINGRANGE | 0 to 3 rad(fmod*фM dev.<15kH) |
| MODULATIONFREQUENCY | 200Hz to 6kHz |
| SENSITIVITY | betterthan 2mV(3rad фMdev,10dB SINAD CCITT-weighted) |
| IFBANDWIDTH | 30kHz |
| AMmeasurement | &sp; |
| FREQUENCYRANGE | 2 to 999.9999MHz |
| MEASURINGRANGE | 0 to 100% |
| INPUTLEVEL | &sp; |
| RF socket | 1mWto 125W |
| RF DIRE socket | 0.01mWto 0.5W |
| ROLUTION | 0.1% |
| MEASURINGACCURACY(m<≧10% | |
| fmod=Hzto 10kHz | 10%&plun;2dis |
| DEMODULATIONDISTORTION | &sp; |
| fmod=300Hzto 3kHz | <1% |
| MODULATIONFREQUENCY | DC to 10kHz |
| Spurious-modulationmeasurement | |
| INPUTLEVEL | &sp; |
| RF socket | 1mW to 125W |
| RFDIRE socket | 20mW to 1V |
| MEASURINGRANGE | 0 to -40dB(CCITT-weighted)referred to 3kHz FM dev.)3radфMdev.or 30%AM |
| MEASURINGACCURACY | 1dB |
| AFGenerator | &sp; |
| Modulationgenerator GEN A | |
| FREQUENCY RANGE | 30Hzto 30kHz |
| ROLUTION | &sp; |
| f<3kHz | 0.1Hz |
| f≧3kHz | 1Hz |
| FREQUENCYERROR | <0.01% |
| LEVELRANGE(EMF) | 0.1mVrms to 5Vrms |
| ROLUTION | &sp; |
| EMF≦5V | 10mV |
| EMF≦1V | 1mV |
| EMF≦0.1V | 0.1mV |
| EMF≦10mV | 10μV |
| LEVELERROR | &sp; |
| f=100Hz to3kHz | <3% |
| f=50Hzto 15kHz | <10% |
| DISTORTION | &sp; |
| f=30Hzto 3kHz | <0.5% |
| f>3kHz | <1% |
| OUTPUTIMPEDANCE(balanced) | &sp; |
| f=300Hzto 3kHz | <10Ω |
| f=30Hzto 30kHz | <40Ω |
| OUTPUT IMPEDADNCE(ualanced) | 600Ω&plun;5% |
| PERMISSIBLELOAD IMPEDANCE | >200Ω |
| AFyzer | &sp; |
| AFvoltmeter | &sp; |
| FREQUENCYRANGE | 30Hz to 30kHz or to CCITT P53A |
| MEASURINGRANGE | 0.1mV to 20V |
| ROLUTION | &sp; |
| Level<0.1V | 0.1mV |
| Level<1V | 1mV |
| Level<10V | 10mV |
| Level<20V | 100mV |
| MEASURINGACCURACY | &sp; |
| f=300Hzto 3kHz | 3% |
| f=50Hzto 15kHz | 6% |
| SOURCEIMPEDANCE | >100kΩ or 600Ω&plun;3% |
| INPUTCAPACITANCE | 20pF |
| AFcounter | &sp; |
| Frequencyrange | 30Hz to 30kHz |
| INPUTLEVEL | 5mV to 20V |
| ROLUTION | &sp; |
| f<300Hz | 0.1Hz |
| f<10kHz | 1Hz |
| f≧10kHz | 10Hz |
| MEASURINGACCURACY | 0.01%&plun;1di |
| Distortionmeter | &sp; |
| INPUTLEVEL | 0.1 to 20V |
| TT FREQUENCY | 1kHz&plun;5Hz |
| MEASURINGRANGE | 0 to 99% |
| ROLUTION | 0.1% |
| MEASURINGACCURACY | &sp; |
| d=1 to90% | 5% of emas.value&plun;3 dis |
| SINADmeter | &sp; |
| INPUT LEVEL | 0.1 to 20V |
| MEASURINGRANGE | 1 to 46dB |
| ROLUTION | &sp; |
| SINAD<30dB | 0.1dB |
| SINAD<≧30dB | 0.5dB |
| MEASURINGACCURACY for SINAD <30dB | 0.8dB&plun;1di |
| Scope& yzer | &sp; |
| Sperumyzer | &sp; |
| FREQUENCYRANGE | &sp; |
| FREQUENCYACCURACY better than 2% of sweep with INPUT-LEVEL RANGE for measuring accuracy3dB in the frequency range 0.5*fc≦f≦2*fc | |
| RF socket | -70to +47dBm |
| RF DIREsocket | -90 to +13dBm |
| SWEETWIDTH | 200kHz,2MHz,10MHz |
| SWEEPTIME | &sp; |
| Wweep width2MHz and 10MHz | approx.500ms |
| Sweepwidth 200kHz | approx.2s |
| EVEALUATIOANDWIDTH | &sp; |
| Sweepwidth 2MHz and 10MHz | 30kHz |
| Wweepwidth 200kHz | 6kHz |
| INHERNTISE on RF DIRE socket | |
| Sweep width 2MHz and 10MHz | -95dBm |
| Sweepwidth 200kHz | -105dBm |
| Oscilloscope | &sp; |
| INPUTSEXTERNAL | Zi=1MΩ/40pF(AC/DC) |
| INPUTSINTERNAL | RX mod,TX demod,duplex demod,AF voltmeter,ridualdistortion |
| FREQUENCYRANGE | DC(3Hz) to 20kHz |
| LEVELERROR | <10% +0.2div |
| GRATING | 6*10div |
| HORIZORTALDERLEION | 2μs/div to 500ms/div |
| VERTICALDEFLEION | 2mV/div to 10V/div or 160Hz/divto 8kHz/div(FM) 0.16rad/div to 8rad/div (фM) 0.8%/div to 40%/div(AM) |
| TRIGGER | &plun;slopeleable trigger leve |
| OPERATINGMOD | auto,rm,one-shot,freeze,tyne measurement(max.rlution2.5μ) |
| Seleive-call encoder and decoder | |
| Standardtone sequenc | XVEI 1,CCIR,VDEW,ZVEI 2,EEA,NATEL,EIA,EURO,CCITT |
| User-definedtone sequenc | &sp; |
| Sequenceof up to 30 ton can be stored by user.Also double ton and underlying continuoustone (with GEN B option) | |
| Encoder | &sp; |
| Operatingmod | &sp; |
| SINGLE-TONEQUENCE(max.30 ton) DOUBLE-TONE SEQUENCE(with GEN B option) (single-toneand double-tone sequenc can be tranitted continuously) ACKWLEDGEMENTCALL(max.30 ton) from rponse time of <100ms ackwledgement call onlossible with optional duplex FM/фM stage FREQUENCY ERROR | |
| Decoder | &sp; |
| Decodingof each tone of tone sequencse (max.30ton) Continuous decoding can be set | |
| General | &sp; |
| Dimensionsand weight | &sp; |
| H*W*D | 230mm*375mm*486mm |
| WEIGHT | approx.18.5kg |
| Powersupply AC | 94 to 132Vor 187 to 264V(47 to 450Hz) |
| Pmax | approx.110W(incl.options) |
| Environment | &sp; |
| OPERATING TEMPERATURE | 5to 45℃ |
| STORAGE TEMPERATURE | -40 to +70℃ |
| RELATIVEHUMIDITY | max.90% |
| Mechanicalstrength (to DIN 40046) | |
| SHOCK | 25g |
| VIBRATION | 5to 10Hz for 10mm amplitued 10 to 60Hz,2g constant |
| EMCconformity | EN 55022:19995,cl B EN 60801:1994,part 2tt level 1 ENV 50140:1995,tt level 2 IEC1000-4-4:1995,tt level 3 |
| Safety | EN61010:1995,part 1 |
| IEEE-bus interface | &sp; |
| STANDARD | IEEE-488 |
| CONNEOR | 24-way |
| FUNIONS | AH1,SH1,L2,T1,SR1,RL1,DC1 |
| Frequencyextension | &sp; |
| Thefollowing specifications apply to the FEX option | |
| RFGenerator | &sp; |
| Carrierfrequency | &sp; |
| FREQUENCYRANGE | 1.0 to 2.3GHz |
| ROLUTION | 1kHz |
| Outputlevel | &sp; |
| RFsocket | -142 to -20dBm |
| RFDIRE SOCKET | -122 to 0 dBm |
| LEVELERROR into 50Ω(1.0 to 2.0GHz) | |
| RF socket | 1.5dB(overrange-110 to -20dBm) |
| VSWR(50)RFsocket | <1.2 |
&sp;
詳細介紹：www.buy17.com&sp; 電話：&sp; 郵箱：
&sp;
&sp;
|
