| ●技術參數 | |
| | | | | | | | | | | | | |
| | MODEL | | | 7130 | 7132 | 7140 | 7142 | |
| | AC WITHSTAND VOLTAGE | | | | | | | | |
| | Output Rating | | 5KVAC/20mA | |
| | | | | Range | Resolution | Accuracy | |
| | Output Voltage，KVAC | 0-5.00 | 0.01 | ±( 2% of setting +5V ) | |
| | Output Frequency | | 50Hz/60Hz±100ppm，User Selection | |
| | Output Waveform | | Sine Wave，THD<2%( Resistion Load )，Crest Factor = 1.3-1.5 | |
| | Output Regulation | | ±( 1% of output +5V )，Form no load full load | |
| | SETTINGS | | | | | | | | | | |
| | Max-Limit AC Current，mA | 0-20.00 | 0.01 | ±( 2% of setting +2counts ) | |
| | Min-Limit AC Current，mA | 0-9.999 | 0.001 | ±( 2% of setting +2counts ) | |
| | Ramp Time，second | | 0-999.9 | 0.1 | ±( 0.1% + 0.05sec ) | |
| | Dwell Time，second | 0，0.3-999.9 | 0.1 | |
| | ( 0=continuous ) | |
| | Arc Detection | | 0，1-9 ranges ( 0=OFF，9 is the most sensitivity ) | |
| | DC WITHSTAND VOLTAGE（7140，7142 ONLY） | | | | | | |
| | Output Rating | | 6KVDC/7500uA | |
| | Output Voltage，KVDC | 0-6.00 | 0.01 | ±( 2% of setting +5V ) | |
| | Output Ripple | | < 5% ( 6KV/7500uA at Resistive Load ) | |
| | SETTINGS | | | | | | | | | | |
| | Max-Limit DC Current，uA | 0-7500 | 1 | ±( 2% of setting +2counts ) | |
| | Min-Limit DC Current，uA | 0-999.9 | 0.1 | ±( 2% of setting +2counts ) | |
| | Ramp Time，second | | 0.1-999.9 | 0.1 | ±( 0.1% + 0.05sec ) | |
| | Dwell Time，second | 0，0.4-999.9 | 0.1 | |
| | ( 0=continuous ) | |
| | Arc Detection | | 0，1-9 ranges ( 0=OFF，9 is the most sensitivity ) | |
| | Discharge Time | | ≦200msec | |
| 7130/7132/7140/7142數位合成型耐壓/絕緣測試儀 |
| | MODEL | | | 7130 | 7132 | 7140 | 7142 | |
| | INSULATION RESISTANCE ( 7132，7142 ONLY ) | | | | | | |
| | Output Rating | | 1KVDC/9999MW | |
| | Output Voltage，VDC | | 30-1000 | 10 | ±( 2% of setting +3V ) | |
| | SETTINGS | | | | | | | | | | |
| | Max-Limit Resistance，MW | 0，1-9999（0=OFF ) | 1 | ±(2% of setting +2counts) at 500-1000VDC，1-1000M | |
| | Min-Limit Resistance，MW | 1-9999 | 1 | ±(5% of setting +2counts) at 500-1000VDC,1000-9999M | |
| | ±(8% of setting +2counts) at 30-500VDC,1-1000M | |
| | Ramp Time，second | | | 0.1-999.9 | 0.1 | ± ( 0.1% + 0.05sec ) | |
| | Dwell Time，second | | | 0，1.0-999.9 | 0.1 | |
| | Delay Time，second | 0，0.5-999.9 | 0.1 | |
| | ( 0=continuous ) | |
| | GENERAL | | | | | | | | | | |
| | Input Voltage AC | | 115/230VAC±15%，50/60Hz±5%，Fuse 3.15A Fast | |
| | PLC Remote Control | Input: Test，Reset，Memory1.2.3，Interlock | |
| | Output: Pass，Fail，Processing | |
| | Interface( Option ) | RS485 Interface | | | | | | | |
| | Memory | 10memories，3 steps/Memory | |
| | Display | 128×64 Graphic LCD | |
| | Safety | Built-in Smart GFI trip current 450uA max，HV shut dowm speed : <1mS | |
| | Key Lock | To prevent unauthorized alteration of test parameters | |
| | Calibration | Build-in software and external calibrated meters | |
| | Verification | Build-in software driven verification menu to test fault detection circuits | |
| | Alarm Volume Setting | | Range : 0-9;0=OFF，1 is softest volume，9 is loudest volume | | | |
| | Environment | 0-40℃，20-80%RH | |
| | Dimension/Net Weight | 215mm(W)×89mm(H)×370mm(D)/10Kg | |
| | ※Ordering Information※------------------------------------------------------------------------------------ | |
| | 7130 AC Withstand Voltage Tester | |
| | 7132 AC Withstand Voltage / Insulation Resistance Tester | |
| | 7140 AC/DC Withstand Voltage Tester | |
| | 7142 AC/DC Withstand Voltage / Insulation Resistance Tester |
