|
UV能量計；UV能量/UV強度/溫度測試儀；UV能量測試儀；紫外燈能量計；UV燈能量測試儀 |
|
|
|
| 產品型號： |
uv-int 160 |
|
|
|
|
|
一、產品簡介： |
|
|
|
|
|
儀器適用： 測量UV紫外光強度，能量，溫度， 儀器裝有軟件，具有記憶功能，能聯電腦使用。 |
|
|
|
|
|
二.技術資料 |
|
|
德國UV-int160 |
|
|
UV能量計 |
|
|
型 號：德國UV-int160 |
|
|
儀器適用： 測量UV紫外光強度，能量，溫度， |
|
|
儀器裝有軟件，具有記憶功能，能聯電腦使用。 |
|
|
波長范圍： UV 250 - 410 nm |
|
|
輸入功率： 0 -- 5,000 mW/ |
|
|
測量范圍： 0-- 2,000 mW/cm2 |
|
|
顯示范圍： 0 -- 36,000 mJ/cm2 |
|
|
能量顯示： 2×16位LCD液晶 |
|
|
測量： ± 5 % |
|
|
測量溫度： 0--115°C |
|
|
取樣速度： 0.01 秒(100次/秒) |
|
|
記錄周期： 120秒. |
|
|
儀器電源： 2 ×3.6 V 長效鋰電池 |
|
|
儀器功耗： 20 uA |
|
|
電池壽命： 2,000 次 |
|
|
儀器尺寸： 120×70×13 mm |
|
|
儀器重量： 200 g |
|
|
工作極限： 置于110°C 測量環境中≯10秒 |
|
|
儀器功能： |
|
|
1.儀器裝有UV傳感器與微處理器； |
|
|
2.裝有測量記憶軟件，能將測量到的光強度、能量、溫度值輸入到電腦里； |
|
|
3.具能自動開機，自動關機功能； |
|
|
4.置于儀器背后的傳感器上覆有保護材料 |
|
|
|
|
|
UV Integrator 160 |
|
|
+ UV-intensity mW/cm2 |
|
|
+ UV-dose mJ/cm2 |
|
|
+ selectable “triggered mode”* |
|
|
+ LCD display |
|
|
+ temperature °C/°F |
|
|
+ SD Memory Card Slot |
|
|
+ graphic chart on PC |
|
|
+ re-chargeable accu cells with charger |
|
|
The UV Integrator 160 is a small, self-contained, high quality UV measuring instrument. It is designed to |
|
|
measure and display peak UV intensity in mW/cm2, UV dosage in mJ/cm2 and temperature in the UV |
|
|
curing process. |
|
|
In the standard version it is equipped with one UV sensor and one temperature sensor for the measuring |
|
|
of: |
|
|
Full UV 250 – 410 nm |
|
|
Temp 32 to 230° F / 0 to 110° C |
|
|
With this total UV band peak energy and dose measuring, most of the measuring requirements of UV |
|
|
curing applications can be covered. |
|
|
Due to its UV sensor and the integrated microprocessor the UV Integrator 160 can measure and display |
|
|
the peak UV-intensity of the total UV spectrum (mW/cm2). |
|
|
Additionally, this UV-measuring instrument is calculating the UV-dosage (mJ/cm2) of the UV energy |
|
|
supplied during the time of exposure of one measuring cycle. The UV-dosage is calculated as the total |
|
|
Integral of UV-dosage over the full UV spectral bands. |
|
|
An extra sensor is measuring temperatures from 32 to 230° F / 0 to 115° C. |
|
|
The sensors are on the back of the unit which also serves as a heat shield. After completion of the |
|
|
measuring cycle the measuring results can be scrolled through on the built in 2 x 16 digit LCD display. |
|
|
*This Integrator features a selectable „triggered mode“, i.e. the 60 sec recording cycle starts within a 120 |
|
|
second readiness phase not before the incident UV-intensity exceeds 2 mW/cm². |
|
|
This microprocessor integrator is additionally equipped with an SD Memory Card Slot. All measuring data |
|
|
are stored on an SD-Memory Card and can be downloaded to a computer. The special evaluation |
|
|
software allows to show, edit and store a history of the measuring results of the entire measuring cycle as |
|
|
graphic and numeric charts (mW/cm2),(mJ cm2) and (°C/°F). |
|
|
A special AUTO-OFF feature that turns off the unit automatically after one minute serves as energy |
|
|
saving and extension of the battery service life. |
|
|
The UV Integrator 160 is available in five different measuring ranges: |
|
|
(Please state upon order) |
|
|
Item 48.2.1 UV Integrator 160, Type 1 Diazo 350 – 460 nm + Temp |
|
|
Item 48.2.2 UV Integrator 160, Type 2 UV-A 315 – 410 nm + Temp |
|
|
Item 48.2.3 UV Integrator 160, Type 3 UV 250 – 410 nm + Temp |
|
|
Item 48.2.4 UV Integrator 160, Type 4 UV-B 280 – 315 nm + Temp |
|
|
Item 48.2.5 UV Integrator 160, Type 5 UV-C 230 – 280 nm + Temp |
|
|
Item 48.2.6 UV Integrator 160, Type 6 UV-V 395 – 445 nm + Temp |
|
|
|
|
