商品描述:產品名稱:JL645B拉動機械計數器
聯系人: 張先生
工作原理及簡介:JL645B計數器是一種通用的五位拉動式機械計數器,用于累加記錄機械往復運動的次數,不設回零機構。當記滿99999時再從00000開始下一循環計數。計數器的計數輪為內齒傳動。當拉動計數器拐臂時,與拐臂相聯接得推進機構使計數輪進行加法計數。此種計數器主要應用于開關電器、實驗設備和印刷設備等行業。
產品系列及相關技術參數:
顯示數字 | 高×寬 4mm×2mm |
積算容量 | 99999 |
額定速率 | 300次/分鐘 |
傳動比 | 1:1 |
工作環境溫度 | -10℃~+50℃ |
工作環境濕度 | ≤85% |
轉動力矩 | ≤1N·cm |
拉動角 | 小:37° :49° |
可根據客戶需求設計制作 | |
產品安裝尺寸圖:
Product name: JL645B Pulling Mechanical Counter
Working principle & Introduction: JL645 counter is a kind of general 5 digits pulling mechanical counter f, it is used to record the accumulative times of the mechanical reciprocating movement. It has no reset resign. When the counter times reach to 99999, re-counting can restart from 00000. Its counting wheels are driven by inside pinions. When the arm of the counter is pulled, the driving mechanism connected to arm will make the counter carry out addition counting. This kind of counter is mainly used in the industries such as high-voltage switch, testing equipment and printing equipment etc.
Technical parameters:
Display digit size | H×W:4mm×2mm |
Max. capacity of accumulative counting | 99999 |
Counting speed | 300times/min |
Transmission ratio | 1:1 |
Operating ambient temperature | -10℃~+50℃ |
Operating ambient relative humidity | ≤85% |
Torque | ≤1N·cm |
Pulling angle | Min. :37° , Max.:49° |
This product can be designed and manufactured according to customer’s needs | |
Product installation & dimension diagram:









