YI-10/6000氣動金剛石鏈條鋸(礦用氣動鏈條鋸),是我公司經過多年的探索,開發出的新型切割與開槽工具。
氣動金剛石鏈條鋸由金剛石鏈條鋸頭、液壓膠管總成、自加壓冷卻水箱三大部分組成,液壓膠管總成將氣源和金剛石鏈條鋸連接起來,氣源提供的氣壓驅動金剛石鏈條鋸運轉,進行切割。工作時,冷卻水通過鏈板中間的孔流向切割部位,起到冷卻和降塵的作用。
氣動金剛石鏈條鋸可用于巖石、礦山開采,用于密閉墻的砌筑,也可用于救援時的混凝土與巖石破拆。
氣動金剛石鏈條鋸所需要的氣源可以是通風管道或空氣壓縮機(鏈條鋸接受的壓力為5-7公斤)。
氣動金剛石鏈條鋸(礦用氣動鏈條鋸)主要用途
切割巖石、混凝土、鋼筋混凝土、管道、磚石、石頭和其它石材;
開槽,用于密閉墻的砌筑;
適用場所:密閉墻開槽、拆除、切割等地面場所。
氣動金剛石鏈條鋸(礦用氣動鏈條鋸)型號的組成及其代表意義
10/6000 鏈條鋸機重(kg)/主軸額定轉速(r/min)
L 鏈條鋸機重(kg)/主軸額定轉速(r/min)
JQ 特征:L-金剛石鏈條
產品類別代號:氣動鋸
金剛石鏈條鋸鋸頭
主要有主機、鏈板、金剛石鋸條、行走導板、開關、冷卻水管接口、空氣管接口等組成。
1—液壓膠管總成2—冷去水管接口3—主機4—行走導板5—鏈板6—開關 7—金剛石鋸條鋸
氣動金剛石鏈條鋸(礦用氣動鏈條鋸)技術參數
*額定主軸轉速:≥6000 r/min
*機重(液壓膠管總成):≤10 kg
*動力源:壓縮空氣
*切割性能S 切割截面積為200mm×100mm,長度為500mm、強度等級為0的混凝土磚,切斷時間不應大于40s
*鋸板長度cm ≥43
*可切割深度cm ≥40
額定壓力:≤0.7 MPa
額定流量:≤1000 L/min
沖洗水壓力:0.2-0.56 MPa
噪聲:≤120 dB(A)
適用巖石硬度:≤8 F
連接氣管長度:200米
設備配置
金剛石鋸頭1套
鋸板1片
氣管20米
自加壓冷卻水箱
切割巖石金剛石鋸條2條
切割松散材質金剛石鋸條2條
設備箱1套
安標證號:MAJ110271
氣動金剛石鏈條鋸(礦用氣動鏈條鋸)產品特點
氣動型金剛石鏈條鋸,氣源容易獲取;
切割速度快,轉速6000r/min;
相對于液壓鏈條鋸,可遠距離操作,200米,液壓鏈條鋸連接的液壓不能過20米;
因為是低壓驅動(氣源壓力小于7公斤),所以相對于液壓鏈條鋸,不存在漏油等問題;
重量輕便,單人即可操作。
常見問題
Q:目前已經有液壓金剛石鏈條鋸,為何還推出氣動金剛石鏈條鋸?
A: 液壓金剛石鏈條鋸存在笨重,長距離操作、若不能解決密封的問題,還有時漏油,但氣動金剛石鏈條鋸就不存在這些問題,它10公斤的重量,單人就可操作,距離氣源可200米。
Q:氣動金剛石鏈條鋸的動力是什么?井下如何解決?
A::壓縮空氣。1、通風管道提供壓縮空氣2、若就近沒有通風管道,配備空氣壓縮機也可以。
Applications:
Cut with ease, speed and portability through Reinforced Concrete, Brick, Block, Concrete Pipe and Natural Stone. The powerful JQL-10/6000 pneumatic chain saw is designed to cut through walls, floors and columns in a single p.
The unique versatility of a concrete cutting chain saw includes the ability to cut all mechanical openings, deep plunge cuts (up to 40cm deep), corners and an endless variety of irregular shapes that are simply not possible with circular saws.
While other folks are cutting with ordinary saws, you can be cutting faster, cheaper and more reliably with the JQL-10/6000 pneumatic chain saw.
Key features:
l High torque output for tough cutting jobs
l Specifically designed for the demanding requirements of professional sawing and drilling contractors
l Safety operating trigger prevents accidental starting
l Now with Diamond chain – optimized for use with pneumatic saws
l Deep plunge cuts – up to 40cm deep
l square corners up to 200mm×100mm with no overcuts
l Operation from a distance up to 200m
l Cut mechanical openings and irregular shapes
l Durable industrial finish on die-cast aluminum body stands up to harsh environments
l Built-in Wallwalker provides leverage advantage to make cutting easier
l Modular design for easy service
l Reliable and easy to maintain – No belts, carburetors or fuel lines to maintain
l Stretch Reduction System (SRS) maximizes chain life and reduces need for adjustments
l No gas or engine fumes to deal with
l Low cost of operation – Pays for itself every time you use it with faster cutting and completion of most jobs in a fraction of the time other saws would take
Technical specification:
Rated speed of spindle
≥6000 r/min
rated pressure
≤0.7 Mpa
rated flow
≤1000 L/min
Power
air bottle , air motor or other compressed air
Max. bar length
430mm
Max. cutting Depth
400mm
Noise level
≤120 dB(A)
Water pressure
0.2-0.56 Mpa
Explosion protection
Exibd I
Weight
10kg. (without bar and chain)
Accessories:
diamond chain saw,1unit
saw guide bar,1piece
air hose,20m
water tank,1
diamond chain,2 for hard rock
diamond chain, 2 for incompact object
Carrying case,1







